How to choose humidifier for curing chamber


CuringChamberguide.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no added cost to you.

If you’re looking to start curing your meat, you’ll need the right tools and supplies – like a humidifier for your dry curing chamber. Choosing the right humidifier can be tricky, but it’s important to get it right to get the most out of your meat-curing process. Here are a few tips for choosing the perfect humidifier for your dry curing chamber. Also, check our guide on choosing a dehumidifier.

Key factors on choosing the right humidifier

Start by considering what type of humidifier will best suit your needs.

Types of humidifiers

There are two main types on the market: evaporative and ultrasonic. Evaporative humidifiers use fans to draw air through a wet filter or pad, while ultrasonic models create mist through high-frequency vibrations.

Both types can provide necessary humidity levels in your chamber; however, if you want a more accurate measure of humidity then an ultrasonic model is recommended.

Why ultrasonic models should be used in a curing chamber?

The primary purpose of using cool mist ultrasonics is because they don’t create heat or steam, an action reserved for warm mist humidifiers.

Depending on your individual humidity needs, these options can significantly alter the temperature in any given area. Opting for an ultrasonic (cool mist) unit would make a minimal impact on temperatures but be sure you use only purified water as those units evaporate everything from the water into the air – including debris that could ruin precious meats and other products.

Size and power of the humidifier

Next, think about how much power you need from your humidifier. This depends largely on the size of your chamber – larger rooms require more powerful units with higher output levels to maintain constant humidity levels throughout the space. If possible, try to find a unit that has adjustable power settings so that you can adjust as needed over time.

Should I use a humidifier inside or outside of the curing chamber?

That’s a great question and I say: it depends on the size of the chamber you have. For small curing chambers (like a frost-free fridge) I would recommend using a home humidifier inside: you don’t need to make additional holes and pipes in the curing chamber.

Here is how can you use humidifier outside of the curing chamber

For a large curing chamber, you can use a more powerful humidifier that will stand outside. Use a short exhaust pipe to connect the chamber, and secure it with tape – or any other method of your choice.

Maintenance

Consider models with tanks that you can easily clean every 2-3 weeks. It’s important because the tank can get clogged with dust and minerals, which will reduce the humidifier’s effectiveness.

Should I use distilled water?

It’s highly recommended to use distilled or filtered water in your humidifier to avoid leaving mineral deposits in the chamber. Hard water can also cause a build-up of limescale, reducing the unit’s efficiency and leading to costly repairs over time.

No standby mode

It is imperative to switch the unit off completely, rather than leaving it on standby; otherwise, when the controller turns on the unit again, it will not boot up automatically.

Noise

Consider noise when selecting a humidifier for your dry curing chamber. Ultrasonic models tend to be quieter than evaporative ones; however, some smaller chambers may not require a powerful unit and thus will not generate much noise no matter which type of humidifier is chosen.

How can I control humidity in my curing chamber?

Once you’ve selected a humidifier, it’s important to make sure it is properly installed and maintained for optimal performance.

  1. In addition to using a humidifier, you can also use a hygrometer (a device for measuring humidity) to monitor and adjust the humidity levels in your curing chamber. A hygrometer will help you keep track of the exact levels of moisture in your space, so you can ensure that everything is running smoothly. Here you will find a full list of what you should buy for a DIY chamber.
  2. Moreover, you will need humidity and temperature controllers to regulate the environment inside your curing chamber. These controllers can be used to adjust and maintain desired humidity levels, making sure that everything is operating properly at all times.
  3. Finally, consider other factors such as temperature and airflow. Make sure that the temperature in your chamber is not too high or low, as this can affect humidity levels. Additionally, make sure there’s adequate airflow throughout the space to ensure that moisture is properly dispersed. You can use computer fans and air filters to help regulate the air in your chamber.

Orgtoy Humidifier – Our Top Choice

Yes. One product. Stop choosing and just start curing meat!
Best Choice
Orgtoy Humidifier
Orgtoy Humidifier
Perfect choice for your dry curing chamber
With its quiet operation, 1-gallon tank capacity, adjustable mist output, 95mm water inlet, and 2ft mist height, this humidifier provides maximum efficiency when it comes to regulating humidity levels. The low-water warning prevents the device from overheating due to an empty tank and keeps your curing chamber running smoothly.
Read Verified Customer Reviews

In addition to using a humidifier, you can also use a hygrometer (a device for measuring humidity) and controllers to regulate temperature and airflow to keep optimal moisture levels inside the chamber. Make sure that everything is operating properly at all times with this top-of-the-line product!

Our experience

We had been searching for a quality humidifier that would last us more than a few years. After trying out different brands and having them all broken down in short order, we decided to give this one a try. We bought 4 of these humidifiers over two years ago, and to our surprise, they have worked beautifully!

They are so simple to set up – just fill them with water and you’re done! Cleaning is also incredibly easy; no complicated parts or difficult-to-reach places like some of the other brands we’ve tried before. And the price was great too – especially when combined with the coupon we found online. Even if it does only last a few years, we don’t mind because it’s not breaking the bank every time something goes wrong with it!

But here we are after two full years of use without any issues or problems at all from any of the four units – what an incredible product! We will be recommending this brand whenever someone is looking for a good humidifier that won’t let them down anytime soon.

How do you clean the Orgtoy Humidifier?

1. Insert 1/2 gallon of warm water and add two tablespoons of white vinegar into the tank, shake vigorously, then allow it to sit for 20 minutes. The vinegar will break down any mineral deposits from the bottom.

2. Drain out all contents in the tank and rinse with cold water afterward.

3. Gently scrub away anything left on its base with a small brush, followed by wiping down everything involved with a soft cloth – don’t forget to clean off the transducer too! The mineral build-up may decrease performance or cause damage if not taken care of accordingly

4 . Empty whatever is still inside before rinsing only this time do your best not to submerge as that could potentially harm your unit’s hardware

That’s it!

John Storm

John Storm
Meat Expert

About John: John Storm is a passionate meat enthusiast who discovered his love of the craft through an unexpected encounter with an old friend. His blog posts and website provide helpful advice and insight into this fascinating process, empowering others with the knowledge they need to embark on their own curing journey. More info

Subscribe
Notify of
guest
0 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments